Fcc / Rss / Eu Compliance; Warning Notices On The Device - Fronius MagicWave 190 Operating Instructions Manual

FCC / RSS / EU FCC
Compliance
This equipment complies with the limit values for an EMC device class A digital device pur-
suant to Part 15 of the FCC Rules. These limit values are intended to provide an adequate
level of protection against harmful emissions when the device is being used in an industrial
environment. This device generates and uses high-frequency energy and can cause inter-
ference to radio communications if it is not installed and used according to the Operating
Instructions.
The use of this device in residential areas will probably cause harmful interference, in
which case the user will be obliged to correct the interference at their own expense.
FCC ID: QKWSPBBCU1
Industry Canada RSS
This device complies with the Industry Canada licence-exempt RSS standards. Its use is
subject to the following conditions:
(1)
(2)
IC: 12270A-SPBBCU1
EU
Conformity with Directive 2014/53 / EU - Radio Equipment Directive (RED)
When installing the antennae to be used for this transmitter, it is essential to maintain a
minimum distance of 20 cm from all people. They must not be installed or operated with
any other antenna or transmitter.
OEM integrators and end users must be aware of the operating conditions of the transmit-
ter in order to comply with the radio frequency exposure guidelines.
Warning notices Warning notices and safety symbols are affixed to power sources with the CSA test mark
on the device for use in North America (USA and Canada). These warning notices and safety symbols
must not be removed or painted over. They warn against incorrect operation, as this may
result in serious injury and damage.
22
The device must not cause any harmful interference.
The device must be able to cope with any interference, including that which could
adversely affect its operation.