Loading A Job; Deleting A Job; Easyjobs On Favourites Button - Fronius MagicWave 190 Operating Instructions Manual

Loading a job

The Load job function can be used to load the data for a saved job or an EasyJob into the
welding parameters.
The relevant data from the job can be changed, saved as a new job or EasyJob, or used
to start welding.
1
2
3
4
5
The job list is displayed.
6
A message advising that the job is about to be loaded is displayed.
7
The job is loaded into the welding parameters.

Deleting a job

1
2
3
4
5
The job list is displayed.
6
A warning that the job is about to be deleted is displayed.
7
The job is deleted.
EasyJobs on Fa- The procedure for saving EasyJobs on the Favourites button is described starting from
vourites button page 30.
106
Press the Menu key
Turn the adjusting dial and select the Job menu
Press the adjusting dial
Turn the adjusting dial and select "Load Job ..."
Press the adjusting dial
Select the job that you want to load (turn adjusting dial and press)
Select "Yes" (turn adjusting dial and press)
Press the Menu key
Turn the adjusting dial and select the Job menu
Press the adjusting dial
Turn the adjusting dial and select "Delete Job ..."
Press the adjusting dial
Select the job that you want to delete (turn adjusting dial and press)
Select "Yes" (turn adjusting dial and press)