System; Power Source Configurations; Reset To Factory Settings; Reset Website Password - Fronius MagicWave 190 Operating Instructions Manual

System

Power source
1
configurations
2
3
4
The keyboard is displayed.
5
6
7
Reset to factory
1
settings
2
A confirmation prompt asking whether you really want to restore the factory settings is dis-
played.
3
4
The power source is reset to the factory settings.
Reset website
1
password
2
A confirmation prompt asking whether you really want to reset the website password is dis-
played.
3
4
The website password is reset to the factory setting:
User name = admin
Password = admin
Performing R/L
NOTE!
alignment
R/L alignment must be carried out separately for each welding process.
Welding circuit resistance R [mOhm]
Measuring the welding circuit resistance "r" provides information on the overall resistance
of the torch hosepack, welding torch, workpiece and grounding cable.
Defaults / System / Power source configuration
Press the adjusting dial
Select name, plant, hall, cell, additional info by turning the adjusting dial
Press the dial to edit the selection
Enter the configuration data by turning and pressing the adjusting dial
Select "OK" (turn adjusting dial and press)
After entering all configuration data, select "Save" (adjusting dial wheel and press)
Defaults / System / Reset to factory settings
Press the adjusting dial
Select yes by turning the adjusting dial
Press the adjusting dial to reset to factory settings
Defaults / System / Reset website password
Press the adjusting dial
Select yes by turning the adjusting dial
Press the adjusting dial to reset the website password
111