Working In The Vicinity Of Power Transmission Lines; Unauthorised Conversion/Modification And Spare Parts Production; Inadmissible Modes Of Operation; Safety Instructions On The Machine - Krone Swadro TC 680 Original Operating Instructions

Safety
Pos: 14.5.17 /BA/Sicherheit/Arbeiten im Bereich von Hochspannungsleitungen @ 11\mod_1223357468516_78.docx @ 145505 @ 2 @ 1
4.9

Working in the vicinity of power transmission lines

1 Always take great care when working under or in the vicinity of power transmission lines.
2 Ensure that when in operation or being transported, the machine cannot exceed a total
height of approx. 4m.
3 If there is any need to travel under overhead lines, the machine operator must request
information on the rated voltage and the minimum height of the overhead lines from the
overhead line operator.
4 Always keep the safety distances according to the table.
Pos: 14.5.18 /BA/Sicherheit/Eigenmächtiger Umbau und Ersatzteilherstellung @ 1\mod_1201937705539_78.docx @ 55745 @ 2 @ 1
4.10

Unauthorised Conversion/Modification and Spare Parts Production

Conversions or modifications of the machine are permitted only
manufacturer. Original spare parts and accessories authorised by the manufacturer help to
ensure safety. Use of other parts may void liability for resulting damage.
Pos: 14.5.19 /BA/Sicherheit/Unzulässige Betriebsweisen @ 11\mod_1223357699923_78.docx @ 145527 @ 2 @ 1
4.11

Inadmissible Modes of Operation

The operating safety of the delivered machine is guaranteed
compliance with the introductory section "Intended use" of the operating instructions. The limit
values listed in the data charts should not be exceeded under any circumstances.
Pos: 14.5.20 /BA/Sicherheit/Sicherheitshinweise an der Maschine @ 1\mod_1201937861961_78.docx @ 55783 @ 2 @ 1
4.12

Safety Instructions on the Machine

The safety instructions on the machine warn of
consist of warning pictograms and a work safety symbol. All safety instructions must be
followed. Always keep the safety instructions clean and in clearly legible condition! If any safety
instructions are damaged or missing, request them from your dealer and then put them in the
places provided for them. Where these safety instructions are and what they mean will be
described in the following chapters.
Pos: 15 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
14
Rated voltage
kV
To 1
Above 1 to 110
Above 101 to 220
Above 220 to 380
Safe distance from overhead lines
m
1
2
3
4
with prior consultation with the
only when it is used as intended in
residual risks associated with the machine. They