Sierra Wireless AirLink GX450 Hardware User's Manual page 2

Hide thumbs Also See for AirLink GX450:
Table of Contents

Advertisement

AirLink GX450 Hardware User Guide
Important
Due to the nature of wireless communications, transmission and reception of data can
Notice
never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.
Although significant delays or losses of data are rare when wireless devices such as the
Sierra Wireless product are used in a normal manner with a well-constructed network, the
Sierra Wireless product should not be used in situations where failure to transmit or
receive data could result in damage of any kind to the user or any other party, including
but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no
responsibility for damages of any kind resulting from delays or errors in data transmitted
or received using the Sierra Wireless product, or for failure of the Sierra Wireless product
to transmit or receive such data.
Safety and
Do not operate the Sierra Wireless product in areas where blasting is in progress, near
Hazards
medical equipment, near life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the Sierra Wireless product
MUST BE POWERED OFF. The Sierra Wireless product can transmit signals that could
interfere with this equipment.
The driver or operator of any vehicle should not operate the Sierra Wireless product while
in control of a vehicle. Doing so will detract from the driver or operator's control and
operation of that vehicle. In some states and provinces, operating such communications
devices while in control of a vehicle is an offence.
The GX450 is classified to ANSI/ISA 12.12.01-2013 and CSA C22.2 No 213-
M(1987)(R2013) and are suitable for use in Class 1, Division 2, Groups A, B, C and D
classified Hazardous Locations.
The following warnings and instructions apply to all GX platforms:
Warning:
SUITABILITY FOR CLASS I, DIVISION 2.
Avertrissement:
RENDRE CE MATERIEL INACCEPTABLE POUR LES EMPLACEMENTS DE CLASSE I, DIVSION
2.
Warning:
THE AREA IS KNOWN TO BE NON-HAZARDOUS.
Avertrissement:
EST SOURS TENSION, A MOINES QU'IL NE S'AGISSE D'UN EMPLACEMENT NON
DANGEREUX.
Warning:
Avertrissement:
DANGEREUX.
Rev. 11 July 2019
EXPLOSION HAZARD–SUBSTITUTION OF COMPONENTS MAY IMPAIR
RISQUE D'EXPLOSION-LA SUBSTITUTION DE COMPOSANTS PEUT
EXPLOSION HAZARD–DO NOT DISCONNECT WHILE CIRCUIT IS LIVE UNLESS
RISQUE D'EXPLOSION-NE PAS DEBRANCHER TANT QUE LE CIRCUIT
DO NOT USE THE USB CONNECTOR IN A HAZARDOUS AREA.
NE PAS UTILISER DE CONNECTEUR USB DANS LES ENVIRONNEMENTS
2
4114008

Advertisement

Table of Contents
loading

Table of Contents