Project 5 - Three Shows Are Controlled Via Three Dmx Channels - WEIGL ProCommander LTC Instruction Manual

9.2.5 Project 5 – Three shows are controlled via
three DMX channels
This project consists of three shows and is controlled via
three DMX channels.
The first DMX channel starts the second show, the second
DMX channel starts the first show and the third show is started
via the third DMX channel.
The content of the Control.ini file looks like this:
!d2=5!rsn1#
!d1>10!rsn2#
!d3<20!rsn3#
1 line: If the value of DMX channel 2 is equal 5 (!d2=5), then
st
show 1 (001_SHOW.WM1) will start in normal mode (!rsn1).
2 line: If the value of DMX channel 1 is greater than 10
nd
(!d1>10), then show 2 (002_SHOW.WM1) will start in normal
mode (!rsn2).
3 line: If the value of DMX channel 3 is less than 20
rd
(!d3<20), then show 3 (003_SHOW.WM1) will start in normal
mode (!rsn3).
Control.ini
85