Deployment (Tab) - WEIGL ProCommander LTC Instruction Manual

Videoplayer Configuration
ATTENTION!
Add in the "HEX" the expression "0D" at the very
end of the HEX command. Otherwise it won't work!
Add for each video a command in the RS232 Channel. In this
case the following commands have been added.
• PLAY VIDEO[Weigl-EM.mp4,1]
• STOP
• PLAY VIDEO[ShowControl.mp4,1]
• STOP
• PLAY VIDEO[ShowControl_powered_by_Weigl.mp4,1]
• STOP
116
ATTENTION!
And keep in mind to add in the "HEX" the expression
"0D" at the end of each HEX command. Otherwise
it won't work!
The "STOP" command after each video disables the loop
function of the video. The next video will be played, when the
command is executed.
• Save your show under "File" and "Save File"

15.2.3 Deployment (Tab)

• "Add HFX file to package" -> Select file