Structure Of The Control.ini File; I: Input Events; T: Time Events - WEIGL ProCommander LTC Instruction Manual

Control.ini
9.1

Structure of the Control.ini file

It must always start with the definition of a trigger event. As
a start condition either an
"!rc: Real time clock
"!d: DMX
ATTENTION!
The limit is one trigger event per line.
Only variable conditions can be combined in one
line. If you need a combination of several trigger
events you have to do this via variables.
9.1.1

!i: Input events

Event related to the remote inputs 1-16.
Example:
!i1c!...# -> if input 1 is activated (c=close), then the
downstream command will be executed.
!i1o!...# -> if input 1 is deactivated (o=open), then the
downstream command will be executed.
!i1t!...# -> if input 1 changes (t=toggle), then the following
downstream will be executed.
70
9.1.2

!t: Time events

The internal timer of the clock starts counting with zero
seconds, zero minutes and zero hours at the moment the device
is powered up. With insertion of the microSD-card, this clock is
"!i: Input
events",
events" can be used.
events", "!t: Time
"!v: Variable events" or
events",