Firmware Update - WEIGL ProCommander LTC Instruction Manual

Configuration ProCommander LTC
Choose the internet protocol version 4 and press the button
"properties".
In the following dialog you justify the
58
The data X has to be unequal 101. The settings for the standard
gateway and DNS-server address are not relevant.
After making these changes, you can use the configurator
on a network connection and also make appropriate setting
changes on the ProCommander
use the front display menu or USB to change these settings if a
computer address modification is not possible.
6.3

Firmware update

With the button "Firmware Update" you can record the
ProCommander
Connect the ProCommander
of the computer. Start the configurator and search with the
LTC with the latest operating software.
®
®
IP address
LTC. Alternatively, you can
®
LTC to the network interface
as 10.0.0.X.