Rc: Real Time Clock Events - WEIGL ProCommander LTC Instruction Manual

also set to "0" zero.
Each time value
minutes:seconds. Hours must be converted to minutes. A time
of 2 hours, 15 minutes and 20 seconds should be formatted as
135:20.
The character after the "t" determines the way the time
should be interpreted.
m is the absolute time after powering on the ProCommander
LTC or after the insertion of a
or new insertion of the card the time is set to zero.
& means "modulo" which means, that any time the value is
reached the command is executed.
Example:
!tm01:20!...# -> if the time 1 minute 20 seconds is reached
after the start-up or plug in of the card, then the downstream
command will be executed.
!t&05:00!...# -> all 5 minutes the downstream command
will be executed.
9.1.3

!rc: Real time clock events

Time-controlled events with the internal real time clock.
That you can use this function you have to insert a battery
first, for further information go to "RealTimeClk". Based on the
date and time values of the real time clock commands can be
executed.
must be entered
microSD card. After each removal
Control.ini
in the format
®
71