Dmx-Read In; Merge-Function - WEIGL ProCommander LTC Instruction Manual

7 DMX-Read in

Via the pins 4 and 5
the external DMX-universe can be merged into the internal
generated DMX-signal. Furthermore, the integrated map
function can be used to control the onboard I/O functions of
the ProCommander
regard, all of the 8 PWM-, and 16 digital output channels can be
assigned to the external DMX-signal.
Additionally, this
DMX data to the timeline of either Conductor
SC+.
7.1

Merge-function

An external DMX-signal can be integrated into the internal
DMX-signal through the merge-function.
This merge function can be activated through the configurator
as well as with the commands "Set-Merge-Start" and "Set-
Merge-End" defined. For further information refer to the ASCII-
command in the ASCII
Different merge-modes define how the external signal is
integrated into the internal signal.
• Merge LTP:
Both values will be compared and the lowest value will be
transferred into the output-signal.
• Merge HTP:
DMX can be read in. As a result,
LTC via the external DMX-signal. In this
®
DMX input can be used to capture incoming
chart.
DMX-Read in
or VenueMagic
TM ®
65