Project 4 - One Area Has To Be Filled With Four Different Recorded Voice Sounds - WEIGL ProCommander LTC Instruction Manual

9.2.4 Project 4 – One area has to be filled with four
different recorded voice sounds
The project has one area. The area can be filled with four
different recorded voice sounds, which are German, Spanish,
French and English. The languages can be changed with a
rotary switch. So four shows have to be created.
The area is activated with switch 1. The pins of the rotary
switch are assigned to pin 10-13.
The content of the Control.ini file looks like this:
!i10c!vmc1=1#
!i11c!vmc1=2#
!i12c!vmc1=3#
!i13c!vmc1=0#
!i1c!vcc1=1!rsn1#
!i1c!vcc1=2!rsn2#
!i1c!vcc1=3!rsn3#
!i1c!vcc1=0!rsn4#
1 line: If input 10 is activated (!i10c), then the value of
st
variable 1 will attain 1 (!vmc1=1).
2 line: If input 11 is activated (!i11c), then the value of
nd
variable 1 will attain 2 (!vmc1=2).
3 line: If input 12 is activated (!i12c), then the value of
rd
variable 1 will attain 3 (!vmc1=3).
4 line: If input 13 is activated (!i13c), then the value of
th
variable 1 will attain 0 (!vmc1=0).
Control.ini
83