Dmx-Read In; Merge-Function - WEIGL ProCommander LTC Instruction Manual

7 DMX-Read in

Via the pins 4 and 5
external DMX-univers can be merged into the internal generated
DMX-signal. Furthermore, the integrated map function can be
used to control the internal periphery of the ProCommander LTC
via the external DMX-signal. So, all of the analogue-, servo-, the 8
PWM-, and the 16 digital output channels can be assigned to the

7.1 Merge-function

external DMX-signal.
An external DMX-signal can be integrated into the internal
DMX-signal through the merge-function.
This section can through the configurator as well as with the
commands "Set-Merge-Start" and "Set-Merge-End" defined. For
further information refer to the ASCII-command table in the
ASCII-chart.
Different merge-modes define how the external signal is
integrated into the internal signal.
Merge LTP:

Both values will be compared and the lowest value will be
transferred into the output-signal.
Merge HTP:

DMX can be read in. As a result, the
DMX-Read in
61