Firmware Update - WEIGL ProCommander LTC Instruction Manual

In the following dialog you justify the
The data X has to be unequal 101. The settings for the standard
gateway and DNS-server address are not relevant.
After making these changes, you can use the configurator on
a network connection and also make appropriate setting changes

6.3 Firmware update

on the ProCommander LTC.
With the button "FW Update Network" you can record the
ProCommander LTC with the latest operating software.
Connect the ProCommander LTC to the network interface of
the computer. Start the configurator and search with the button
"Scan for Devices" for the connected ProCommander LTC and
afterwards click on "FW Update Nettwork" button.
ProCommander LTC configuration
IP address as 10.0.0.X.
53