Signaling Server - Nortel 1000 Installation And Commissioning Manual

Page 52 of 466 System components
CP PM Call Server Customer Database Transfer
CP PM Call Server Keycode

Signaling Server

NN43041-310 Standard 01.11
The RMD used for installation must be created
specifically for CP PM using the mkbootrmd utility
provided in the CP PM Call Server install zip file. An RMD
created using the CP PIV mkbootrmd utility will not work
on a CP PM Call Server installation. CP PM hardware
requires different bootrom.sys and nvram.sys files than
CP PIV due to the differences in the processor chipset
used on the two platforms.
All CP PII databases must be copied from floppy disk to CF card using the
existing Database Media Converter tool.
Keycode files reside in /keycode directory and have different names but must
have the same extension '.kcd'. The maximum keycode file name length
including the extension is 25 characters. The following feature packages are
required:
• 368 CPP_CNI CP Pentium Backplane for Intel Machine
• 402 SOFT_SWITCH
• 403 IPMG
• 390 SBO Branch Office
• 410 HIGH_AVAIL High Availability
Multiple hardware versions of the Signaling Server are introduced for
Release 5.0:
• 1U signaling servers
• CP PM Signaling Server
The existing ISP1100 Signaling Server is also supported for Release 5.0.
October 2008
IMPORTANT!