Cabling The Cards - Nortel 1000 Installation And Commissioning Manual

Figure 23
2-port SDI cable (NTAK19EC) cable

Cabling the cards

Cabling the MGC
Installing and connecting CS 1000E hardware
The following sections describe the process required to cable the MGC and
CP PM cards.
The existing 3-port SDI cable (NTBK48AA) is reused. It connects to the SDI
port on the Chassis. Figure 24 on
CT ports are reserved for the CP PM card only. The CE connects to the ELAN
Communication Server 1000E
End of Procedure
page 109 shows front of MGC. The CE and
Installation and Commissioning
Page 107 of 466