19-Inch Rack; System Cables - Nortel 1000 Installation And Commissioning Manual

19-inch rack

System cables

Table 8
MRV IR-8020M Terminal Server profile (Part 2 of 2)
Property
Power
Cooling
Card slots
Connectors
All CS 1000E system components are mounted in a customer-supplied
19-inch rack. Ground the rack and equipment to the NTDU6201 Ground Bar.
Table 9 on page 76
The base marketing package NTHU53AA provides an NTRC17 crossover
cable to connect the LAN2 ports of the two core CP PM Call Servers. It also
contains two MRV Terminal Server cables (NTDU6302) to connect from
COM port 1 of both core CP PM Call Servers to the MRV Terminal Server.
Note: Order the proper power cord for your region.
Communication Server 1000E
System components
Description
• Power cord connector is located on the left-hand
corner on the unit's backplane.
• Power supplies are factory installed and not
customer replaceable.
• Unit is AC powered (120 V AV @ 1.58 amps).
• Forced air cooling with side-to-side air flow.
• The fans run at a single speed.
• Ensure that equipment ventilation openings are
not blocked.
• None
• Twenty console ports for modular RJ-45
connectors
• One RJ-45 (10BaseT) network interface
lists the cables required with the CS 1000E system.
Page 75 of 466
Installation and Commissioning