Appendix A Chassis Views And Technical Specifications; Chassis Views; Power Button - H3C MSR3610-I-DP Installation Manual

Appendix A Chassis views and technical
specifications

Chassis views

The following figures are for illustration only.
Figure 20 Front panel
(1) AC power receptacles PWR1 and PWR2
(3) Power button/LED
(5) Console port (CONSOLE)
(7) Ethernet fiber port SFP1 (combo interface)
(9) Ethernet copper ports GE2 to GE7
Figure 21 Rear panel
(1) SIC interface module slots 1 to 4

Power button

WARNING!
The device might still have power after you press the power button. Do not reboot the device or
remove power cords from the device until the power button/LED goes off.
CAUTION:
• Forced power-off might cause data loss in virtual machines. Please use it with caution.
• Avoid accidentally pressing the power button when the device is operating. Doing so will power
off the device system and cause service interruption.
The power button is used to power on or power off the Comware system and virtual machines
created on the Comware system.
(2) Hard disk slot
(4) USB port
(6) Ethernet fiber port SFP0 (combo interface)
(8) Ethernet copper ports GE0 and GE1 (combo
interfaces)
(10) Hard disk button (HD)
(2) Grounding screw
27