Siemens SINUMERIK 840D Installation Manual page 93

15.The "Ready to update program" window opens.
Click "Cancel" to cancel the update after prompt.
Note
Cancel update
If you cancel an update, you may have to return to the previously created snapshot due to
the update not having reset all settings.
- OR -
Click "Update >" to start the update.
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
Installing/uninstalling/modifying the SINUMERIK Integrate server
4.4 Installing the server update
93