Siemens SINUMERIK 840D Installation Manual page 87

16.The "SINUMERIK Integrate 5.x Completed" window opens.
A message is displayed showing that the installation was successful.
A token is generated during the installation for access to the "Consul" software.
– Click on the "Copy to clipboard" button to copy the token directly to the clipboard.
– Activate the "Open log file" checkbox to view the log files.
– Then click on "Finish" to complete the installation and to view the log files, if applicable.
17.After the installation has been completed, a restart is required.
After the installation, set up the encrypted connection.
Additional information is provided in chapter: Certificate on the server (Page 111).
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
Installing/uninstalling/modifying the SINUMERIK Integrate server
- OR -
If you will need the token at some later date, find the file in the following directory:
"C:\Siemens\SINUMERIK_Integrate_5\Consul\encrypt.json".
You require administrator rights to open the token.
If the log file has been created in the installation directory, the file opens.
If the log file was not created in the installation directory, the current log file MSI Log
opens.
Additional information regarding the log files is provided in chapter: Log files (Page 109).
4.3 Installing the server setup
87