Siemens SINUMERIK 840D Installation Manual page 141

Procedure
1. The "Settings" window is open.
Press the "URLs>" softkey.
2. Press the "Edit" softkey and select the following settings:
– Directories: Select the "User" entry in the "Directories" drop-down list.
– Display home page: You do not have to enter any URL or you can leave the default
– RenderService: You do not have to enter any URL or you can leave the default setting.
– Web service URL: Activate the "Overwrite here" checkbox.
– Enter the following URL web service:
3. Press the "OK" softkey.
A syntax check is performed and the access data is saved.
4. Restart the control system.
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
setting.
Server port (http://<ipadress>:SERVERPORT/Platform/SinInt.MhComm.Service/
MHComm/MHComm.asmx)
- OR -
Platform (https://<ipadress>/Platform/SinInt.MhComm.Service/MHComm/
MHComm.asmx)
Installing SINUMERIK Integrate
7.1 SINUMERIK Integrate with SINUMERIK Operate
141