Siemens SINUMERIK 840D Installation Manual page 4

Preface
Target group
This document addresses commissioning engineers and machine tool manufacturers. The
document provides detailed information for commissioning engineers that they require to
commission the software.
Scope of validity
This manual is valid for use with the following product versions:
● SINUMERIK Integrate, version 5.0.3.0
● Manage MyResources /Tools, version 1.0.3.0
● Manage MyResources /Programs, version 1.0.3.0
● Optimize MyProgramming /NX-Cam Editor, version 1.0.3.0
Benefits
The software installation manual instructs the target group on how to install and uninstall the
software correctly.
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
For the sake of simplicity, this documentation does not contain all detailed information about all
types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Note regarding the General Data Protection Regulation
Siemens observes standard data protection principles, in particular the principle of privacy by
design. That means that this product does not process / store any personal data, only technical
functional data (e.g. time stamps). If a user links this data with other data (e.g. a shift schedule)
or stores personal data on the same storage medium (e.g. hard drive) and thus establishes a
link to a person or persons, then the user is responsible for ensuring compliance with the
relevant data protection regulations.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet at the
following address (https://support.industry.siemens.com/cs/sc/2090/) in the "Contact" area.
If you have any technical questions, use the online form in the "Support Request" area.
4
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE