Siemens SINUMERIK 840D Installation Manual page 128

Configuring the settings
6.1 Configuration using the "Consul" software
3. The start page opens.
4. After the input of various pages, configure the following properties in the right window area:
– Password policies
– Blocking rules for users
– Tool life for applications
– Configuring a certificate
Configuring password policies
You can configure the following password guideline, for example:
Password guideline
RequiredLength
Defines the minimum password length
RequireDigit
If you activate this setting, then the password must include at least one char‐
acter.
RequireNonAlphanumeric
If you activate this setting, then as a minimum, the password must include a
special character, for example #, &, @, etc.
RequireUppercase
If you activate this setting, then the password must include at least one up‐
percase letter.
RequireLowercase
If you activate this setting, then the password must include at least one low‐
ercase letter.
RequiredUniqueChars
Defines the number of special characters that the password must include.
Procedure
1. Click on the "KEY/VALUE" Button.
2. Select the "AuthenticationOptions" option at "PROCESSES/SININT.IDENTITY.SERVICE".
128
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE
Settings
Type: Default value:
Integer
8
Boolean true
Boolean true
Boolean true
Boolean true
Integer
1