Fukuda FL-601 Series Operational Manual page 84

MAINTENANCE FUNTIONS
■ STABILITY CONFIRMATION FUNCTION
Instructions on how to confirm the stability of the tester's internal air pressure circuit are
described below.
Preparation
・Is the AIR SUPPLY (Test Pressure) being supplied?
・Is the A.P.SUP (Pilot Valve Operation Pressure) being supplied?
・Is the work bowl valve closed?
1. Display the initial screen.
2. Press the MAINT Key.
3. Press the ENT key.
4. Move the * mark next to Stability Check
Move the cursor using the
+000
kPa
Ready
Pass 0000
Maintenance
Maint1/2P
＊Volume Ｍeasurement
I/Ocheck
SelfCheck
StabilityCheck
SoftVersion
Keys.
Maint1/2P
Volume Ｍeasurement
I/Ocheck
SelfCheck
＊StabilityCheck
SoftVersion
STABILITY CONFIRMATION FUNCTION
Manual
GroupNo 00
83