Sas Tape-Out Adapter - VERITAS 5150 Product Description Manual

SAS tape-out adapter

Mellanox ConnectX-4 Lx EN MCX4121A-ACAT Ethernet card
Table 1-12
specifications (continued)
Item
Storage temperature
Storage humidity
System interface type
Speed and slot width
Data rate supported per port
Air Flow (minimum)
The SAS tape-out adapter is used to connect external SAS devices to the Veritas
5150 Appliance. The adapter comes standard on all configurations of Veritas 5150
Appliance.
The SAS tape-out adapter assembly includes a port for external SAS-3 device
connections and an attached internal SAS-3 cable. The adapter's internal SAS-3
cable connects to Connector 0 on the RMS3HC080 internal mezzanine RAID
controller.
SAS tape-out adapter
Figure 1-6
About the Veritas 5150 Appliance
Appliance I/O configuration options
Specification
-40°C to +70°C (-40°F to +158°F)
90% RH (operating, non-operating)
PCIe v3.0
8.0 GT/s (gigatransfers per second), 8-Lane
10
300 LFM (linear feet per minute)
22