About The Power Supply Led States - VERITAS 5150 Product Description Manual

About the Power Supply LED states

Amber LED status
Table 1-6
LED state
Solid On (SO)
Off
1-Hz blinking
2-Hz blinking
Green LED status
Table 1-7
Condition
Power on with no drive activity
Power on with drive activity
Power on and drive spun down
Power on with drive spinning up
The power supply module has a bi-color LED to represent the current status of the
power supply.
The following table provides a description of each power supply state.
Power supply LED states
Table 1-8
LED
Solid green
Off
1-Hz blinking (green)
Solid amber
About the Veritas 5150 Appliance
Drive status
Hard drive fault
No access and no fault
RAID rebuild in progress
Locate (identify)
LED state
Solid On (SO)
Blinks off when processing a
command
Off
Blinks
Power supply condition
Output on and ok
No AC power to all power supplies
AC is present but only 12 VSB or is in cold
redundant state
AC cord is unplugged or AC power is
■
lost but a second power supply with
AC input power is present
Power supply critical event is causing
■
a shutdown such as a failure, OCP,
OVP or fan fail
Appliance control panel
16