Rack Mounting - JTS US-8001D Instruction Manual

5-3 Rack Mounting

(1) Before mount receivers onto DR-900 rack adaptor, please release any cables from
the rear of the receiver.
(2) Turn over receiver and DR-900 rack adaptor simultaneously, there are 4 threaded
holes each in the bo om of receiver and rack adaptor for inserting screws.
(3) Single receiver
Insert in a receiver through the front of DR-900 until it is rmly a ached to the
rack, then screw on a RP-900 to another side of the rack. (Figure 4)
(4) Dual receivers
e same way as above, put one
receiver to each rack space.
(Figure 4)
16