5-2 Battery Insertion of the transmitter
(1) Mh-850 & Mh-750 Handheld Transmi er
1. Turn the microphone ball grille counter-clockwise (Step 1 of Figure 2), press
both release knobs to remove the ba ery tray from the mic. housing (Step 2 of
Figure 2).
2. Insert two 1.5V ba eries according to the correct polarity, and return the ba ery
tray back to housing (Step 3 of Figure 3). Aim the connecting pins exactly
toward the cavities on the bo om side of detachable mic. capsule module (Step 4
of Figure 3), and tighten it clockwise!
(Figure 2)
(Figure 3)
14