1
Lock the ISOFIX connectors where
number 3 can be seen.
2
Lock the support leg where 5 holes
can be seen.
*
: Costa Rica, R.Dominica, Guatemala,
Honduras, Nicaragua, Panama, El Salva-
dor, Chile, Aruba, Curacao, Peru, Brazil
and Argentina
When using a "i-Size MIDI" (for ASEAN
■
countries
Adjust the support leg and ISOFIX connec-
tors as follows:
1
Lock the ISOFIX connectors where
number 3 can be seen.
Lock the support leg where 5 holes
2
can be seen.
*
: Brunei, Indonesia, Malaysia, Singapore,
the Philippines, Vietnam and Thailand
LS500h_OM_General_OM50J66E
*
)
1-2. Child safety
WARNING
When installing a child restraint sys-
■
tem
Observe the following precautions.
Failure to do so may result in death or
serious injury.
After securing a child restraint system,
●
never adjust the seat.
When using the lower anchorages, be
●
sure that there are no foreign objects
around the anchorages and that the
seat belt is not caught behind the child
restraint system.
Follow all installation instructions pro-
●
vided by the child restraint system
manufacturer.
Using a top tether anchorage
Top tether anchorages
■
Top tether anchorages are provided
for the outboard rear seats.
Use top tether anchorages when fixing
the top strap.
Top tether anchorages
A
Top strap
B
Fixing the top strap to the top
■
tether anchorages
Install the child restraint system in
accordance to the operation manual
89
1