Table of Contents
Advertisement
510
6-3. Do-it-yourself maintenance
Blown fuse
B
Type D
Normal fuse
A
Blown fuse
B
After a fuse is replaced
■
When installing the lid, make sure that the
●
tab is installed securely.
If the lights do not turn on even after the
●
fuse has been replaced, a bulb may need
replacement.
If the replaced fuse blows again, have the
●
vehicle inspected by your Lexus dealer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting
the wiring harness from damage.
WARNING
To prevent system breakdowns and
■
vehicle fire
Observe the following precautions.
Failure to do so may cause damage to
the vehicle, and possibly a fire or injury.
Never use a fuse of a higher amperage
●
rating than that indicated, or use any
other object in place of a fuse.
Always use a genuine Lexus fuse or
●
equivalent.
Never replace a fuse with a wire, even
as a temporary fix.
Do not modify the fuses or fuse boxes.
●
LS500h_OM_General_OM50J66E
NOTICE
Before replacing fuses
■
Have the cause of electrical overload
determined and repaired by your Lexus
dealer as soon as possible.
Advertisement
Table of Contents
