342
4-5. Using the driving support systems
on/off the function.
1
Press
Blind Spot Monitor operation
Vehicles that can be detected by the Blind Spot Monitor
■
The Blind Spot Monitor uses rear side radar sensors to detect the following vehi-
cles traveling in adjacent lanes and advises the driver of the presence of such vehi-
cles via the indicators on the outside rear view mirrors.
Vehicles that are traveling in areas that are not visible using the outside rear
A
view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that are not visible
B
using the outside rear view mirrors (the blind spots)
The Blind Spot Monitor detection areas
■
The areas that vehicles can be detected in are outlined below.
The range of each detection area is:
Approximately 0.5 m (1.6 ft.) to 3.5 m (11.5 ft.) from either side of the vehicle
A
Approximately 1 m (3.3 ft.) forward of the rear bumper
B
Approximately 3 m (9.8 ft.) from the rear bumper
C
LS500h_OM_General_OM50J66E
or
to select
.
2
Press
or
to select
then press
.
and
*1