Table of Contents
Advertisement
414
5-3. Using the air conditioning system and defogger
driver and passenger seats sepa-
rately ("DUAL" mode) (P.417)
Select the air flow mode
G
Vehicles with 4-ZONE climate con-
trol
Display the front seat heaters/front
A
seat ventilators control screen
(P.422)
Adjust the left side seat tempera-
B
ture setting
Adjust the fan speed setting
C
Adjust the right side seat tempera-
D
ture setting
Select the left side seat air flow
E
mode
Set cooling and dehumidification
F
function on/off
If the "A/C" indicator is turned off, the sys-
tem will blow ambient temperature airor
heated air.
Adjust the temperature for driver,
G
passenger and rear seats sepa-
rately ("4-ZONE" mode) (P.417)
Select the right side seat air flow
H
mode
Blower customization (if equipped)
■
Fan speed setting during the automatic
LS500h_OM_General_OM50J66E
mode operation can be customized.
Each time
is selected, the fan speed
setting mode changes as follows.
"NORMAL" "ECO" "FAST"
"NORMAL"
Windshield wiper de-icer (if equipped)
■
This feature is used to prevent ice from
building up on the windshield and wiper
blades.
The windshield de-icer will automatically
turn off after a while.
Eco air conditioning mode (if equipped)
■
When Eco drive mode is selected using the
driving mode select switch, eco air condi-
tioning mode turns on.
When a drive mode other than Eco drive
mode is selected, eco air conditioning
mode may turn off.
Pollen removal mode
■
Outside air mode switches to
(recirculated air) mode. Pollen is removed
from the air and the air flows to the upper
part of the body.
Usually the system will automatically turn
off after a while.
In order to prevent the windshield from fog-
ging up when the outside air is cold, the
dehumidification function may operate or
the outside/recirculated air mode may not
switch to
(recirculated air) mode.
Pollen is filtered even if the pollen removal
mode is turned off.
nanoe™ system
■
The air conditioning system adopts nanoe™
technology. This helps to fill the cabin with
refreshing air by emitting slightly acidic
nanoe™ ions coated with water particles
through the front center vent on driver's
*
side
.
When the fan is turned on and nanoe™
●
on the option control screen is selected,
the nanoe™ system is activated.
When the fan is operated in the following
●
Advertisement
Table of Contents
