Table of Contents
Advertisement
86
1-2. Child safety
When using the front passenger
seat
If installing the child restraint system to the
front passenger seat is unavoidable, refer
to P.62for the front passenger seat adjust-
ment.
When using the power rear seat (if
equipped)
If there is a gap between the child seat and
the seatback, adjust the seatback angle
until good contact is achieved. (P.63)
2
Run the seat belt through the child
restraint system and insert the plate
into the buckle. Make sure that the
belt is not twisted. Securely fix the
seat belt to the child restraint sys-
tem in accordance to the directions
enclosed with the child restraint
system.
3
If your child restraint system is not
equipped with a lock-off (a seat belt
LS500h_OM_General_OM50J66E
locking feature), secure the child
restraint system using a locking clip.
4
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.87)
Removing a child restraint system
■
installed with a seat belt
Press the buckle release button and
fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to the
rebound of the seat cushion. Release the
buckle while holding down the child
restraint system.
Since the seat belt automatically reels itself,
slowly return it to the stowing position.
When installing a child restraint system
■
You may need a locking clip to install the
child restraint system. Follow the instruc-
tions provided by the manufacturer of the
system. If your child restraint system does
not provide a locking clip, you can purchase
the following item from your Lexus dealer:
Locking clip for child restraint system
(Part No. 73119-22010)
Advertisement
Table of Contents
