Table of Contents
Advertisement
116
1-4. Theft deterrent system
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
Each time the intrusion sensor and tilt sen-
sor are canceled/set, a message will be
shown on the multi-information display.
Canceling and automatic re-enabling of
■
the intrusion sensor and tilt sensor
The alarm will still be set even when the
●
intrusion sensor and tilt sensor are
canceled.
After the intrusion sensor and tilt sensor
●
are canceled, pressing the power switch
or unlocking the doors using the entry
function or wireless remote control will
re-enable the intrusion sensor and tilt
sensor.
The intrusion sensor and tilt sensor will
●
automatically be re-enabled when the
alarm system is deactivated.
Intrusion sensor detection considera-
■
tions
The sensor may trigger the alarm in the fol-
lowing situations:
People or pets are in the vehicle.
●
A window or moon roof is open.
●
In this case, the sensor may detect the fol-
lowing:
LS500h_OM_General_OM50J66E
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
Small insects such as moths or flies are in
●
the vehicle.
Unstable items, such as dangling acces-
●
sories or clothes hanging on the coat
hooks, are in the vehicle.
The vehicle is parked in a place where
●
extreme vibrations or noises occur, such
as in a parking garage.
Ice or snow is removed from the vehicle,
●
causing the vehicle to receive repeated
impacts or vibrations.
Advertisement
Table of Contents
