Table of Contents
Advertisement
nated with the high beams.
The shaded high beams help optimize for-
ward visibility while reducing the dazzling
effect on the drivers of vehicles ahead.
Adjusts the distance that the low
beams are projected according to
the distance to a preceding vehicle.
When driving at low speeds, the
cornering lights will illuminate the
area around both front corners of
the vehicle (except for vehicles sold
in Morocco).
Activating the Adaptive
High-beam System
1
Press the Adaptive High-beam Sys-
tem switch.
2
Turn the headlight switch to the
or
LS500h_OM_General_OM50J66E
position.
4-3. Operating the lights and wipers
When the headlight switch lever is in the
low beam position, the AHS system will be
enabled and the AHS indicator will illumi-
nate.
Operating conditions of the Adaptive
■
High-beam System
When all of the following conditions are
●
met, the high beams will be turned on
automatically and the system will operate:
• The vehicle speed is approximately 15
km/h (10 mph) or more.
• The area ahead of the vehicle is dark.
*
: When the vehicle speed is approxi-
mately 30 km/h (19 mph) or more, the
area in the direction that the vehicle is
turning will be illuminated more brightly
than other areas while driving on a
curve.
When all of the following conditions are
●
met, the shaded high beams will turn on
and the distance that the low beams are
projected will be adjusted automatically,
depending on the location of vehicles
ahead:
• The vehicle speed is approximately 15
km/h (10 mph) or more.
• The area ahead of the vehicle is dark.
• There are vehicles ahead with headlights
or tail lights turned on.
If any of the following conditions are met,
●
the high beams or shaded high beams will
be changed to the low beams automati-
cally:
• The vehicle speed is below approxi-
mately 15 km/h (10 mph).
• The area ahead of the vehicle is not dark.
• There are many vehicles ahead.
245
4
*
Advertisement
Table of Contents
