Lexus LS 500h 2019 Owner's Manual page 140

138 2-1. Instrument cluster
Audio system-linked display
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Driving support system informa-
tion display
Select to display the operational status
of the following systems:
 LTA (Lane Tracing Assist) (if
equipped) (P.297)
 LDA (Lane Departure Alert with
steering control) (if equipped)
(P.307)
 Dynamic radar cruise control with
full-speed range (if equipped)
(P.315)
 Dynamic radar cruise control (if
equipped) (P.326)
 Cruise control (if equipped)
(P.334)
Settings display
Meter display settings that can be
■
changed
 Language
Select to change the language displayed.
 Units
Select to change the units of measure dis-
played.
 Speedometer display (except F
SPORT models)
Select to set the display of the speedome-
LS500h_OM_General_OM50J66E
ter to digital/analog/both digital and ana-
log.
 Drive information 1/Drive informa-
tion 2
Select to select up to 2 items (P.136) that
will be displayed on each Drive information
screen (Drive information 1 screen and
Drive information 2 screen) respectively.
 Clock
Select to switch between 12-hour display
and 24-hour display.
 Pop-up display
Select to enable/disable pop-up displays
for each relevant system.
 Accent color
Select to change the accent color on the
screen, such as the cursor color.
 Tachometer setting
Select to set the display of the Hybrid Sys-
tem Indicator or tachometer for each driv-
ing mode.
 Rev indicator (F SPORT models)
• Select to enable/disable the rev indica-
tor.
• Select to set the engine speed at which
the rev indicator (amber) will begin to be
displayed.
 Rev peak (F SPORT models)
Select to enable/disable the rev peak.
 EV indicator
Select to enable/disable the EV indicator.
 Default setting
Select to reset the meter display settings to
the default setting.