beams may be flashing or dazzling
pedestrians or other drivers
• When the vehicle is used in an area in
which vehicles travel on the opposite side
of the road of the country for which the
vehicle was designed, for example using
a vehicle designed for right-hand traffic in
a left-hand traffic area, or vice versa
Customization
■
Some functions can be customized.
(P.567)
Turning the high beams on/off
manually
Switching to the low beams
■
Press the Adaptive High-beam System
switch.
The AHS indicator will turn off.
Press the switch to activate the Adaptive
High-beam System again.
Switching to the high beams
■
Push the lever away from you.
The AHS indicator will turn off and the high
beam indicator will turn on.
Pull the lever to its original position to acti-
vate the Adaptive High-beam System.
LS500h_OM_General_OM50J66E
4-3. Operating the lights and wipers
Switching to the high beams temporarily
■
The high beams are turned on while the
lever is pulled toward you. Returning the
lever to its original position turns the low
beams on. A while after the low beams are
turned on, the Adaptive High-beam System
will be activated again.
247
4