Lexus LS 500h 2019 Owner's Manual page 245

NOTICE
To prevent 12-volt battery discharge
■
Do not leave the lights on longer than
necessary when the hybrid system is off.
Turning on the high beam head-
lights
1 With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2 Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
Follow me home system (for
Malaysia and Morocco)
This system allows the headlights to be
turned on for 30 seconds when the
power switch is off.
Pull the lever toward you and release it
with the light switch in
ing the power switch off.
LS500h_OM_General_OM50J66E
4-3. Operating the lights and wipers
The lights are turned off in the following
situations.
 The power switch is turned to ON
mode.
 The light switch is turned on.
 The light switch is pulled toward you
and then released.
Cornering lights
 When the steering wheel or turn
signal lever is operated while the
headlights are on (low beam), a cor-
nering light will turn on and light up
the direction of movement of the
vehicle. The cornering lights are
designed to ensure excellent visibil-
ity when making a turn at an inter-
section.
However, when vehicle speed is more than
approximately 35 km/h (22 mph), the cor-
nering lights will not turn on.
 When the shift position is in R while
the headlights are on (low beam),
both cornering lights will turn on.
This is designed to enhance visibility
after turn-
when parking.
243
4