70
1-2. Child safety
Not suitable for child restraint sys-
tem.
Never use a rear-facing child
restraint system on the front pas-
senger seat when the airbag man-
ual on-off switch is on or without
the airbag manual on-off switch.
*1
: Move the front seat fully rearward. If the
passenger seat height can be adjusted,
move it to the upper most position.
*2
: Adjust the seatback angle to the most
upright position. When installing a for-
ward-facing child seat, if there is a gap
between the child seat and the
seatback, adjust the seatback angle
until good contact is achieved.
Detail information for CRS installation
■
Seat position number
Seating position suitable
for universal belted
(yes/no)
i-Size seating position
(yes/no)
Seating position suitable
for lateral fixture
(L1/L2/no)
LS500h_OM_General_OM50J66E
*3
: If the head restraint interferes with your
child restraint system, and the head
restraint can be removed, remove the
head restraint.
Otherwise, put the head restraint in the
upper most position.
*4
: Use only a front-facing child restraint
system when the airbag manual on-off
switch is on or without the airbag man-
ual on-off switch.
Seating position
Vehicles with airbag
Vehicles without
manual on-off
airbag manual
on-off switch
ON
yes
yes
Forward
Forward facing only
facing
only
no
no
no
no
switch
OFF
yes
yes
no
yes
no
no
yes
yes
no