Lexus LS 500h 2019 Owner's Manual page 280

278 4-5. Using the driving support systems
multi-information display. At this time,
the FCTA (Front Cross Traffic Alert)
system will also be enabled/disabled.
Changing the pre-collision warn-
■
ing timing
The pre-collision warning timing can
be changed on
multi-information display. The warning
timing for the pedestrian and FCTA
(Front Cross Traffic Alert) system will
also be changed.
The warning timing setting is retained
when the power switch is turned off. How-
ever, if the pre-collision system is disabled
and re-enabled, the operation timing will
return to the default setting (middle).
Operational conditions
■
The pre-collision system is enabled and the system determines that the possibility of a frontal
collision with a vehicle, pedestrian/bicyclist, guardrail, etc. or a front side collision with a
vehicle is high. Each function is operational at the following speeds:
Pedestrian alert
●
LS500h_OM_General_OM50J66E
(P.134) of the
objects
Pedestrians
1 Early
2 Middle
This is the default setting.
3 Late
Changing the pedestrian alert tim-
■
ing
If the pre-collision warning timing is
changed, the pedestrian alert and
FCTA (Front Cross Traffic Alert) timing
will also be changed accordingly.
Vehicle speed
Approx. 30 to 65 km/h (20 to 40 mph)