Table of Contents
Advertisement
142
2-1. Instrument cluster
Using the head-up display
Enabling/disabling the head-up dis-
■
play
Press the HUD switch.
Changing settings of the head-up
■
display
The following settings can be changed
on
of the multi-information display.
(P.567)
Brightness and vertical position of
the head-up display
Select to adjust the brightness or vertical
position of the head-up display.
Hybrid System Indicator/tachome-
ter
Select to display the Hybrid System Indica-
tor, tachometer or no content.
Display content
Select to enable/disable the following
items:
• Route guidance to destination/street
name
• Driving support system display
• Compass (heading-up display)
• Audio system operation status
*
: Make sure to enable this display when
LS500h_OM_General_OM50J66E
using the driving support systems
Display angle
Select to adjust the angle of the head-up
display.
Enabling/disabling of the head-up dis-
■
play
If the head-up display is disabled, it will
remain disabled when the power switch is
turned off then back to ON mode.
Display brightness
■
The brightness of the head-up display can
be adjusted on
display. Also, it is automatically adjusted
according to the ambient brightness.
Head-up display automatic position
■
adjustment
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(P.193)
When the 12-volt battery is discon-
■
nected
The customize settings of the head-up dis-
play will be reset.
WARNING
Caution for changing settings of the
■
head-up display
As the hybrid system needs to be operat-
ing while changing the settings of the
head-up display, ensure that the vehicle
is parked in a place with adequate venti-
lation. In a closed area such as a garage,
exhaust gases including harmful carbon
monoxide (CO) may collect and enter
the vehicle. This may lead to death or a
serious health hazard.
*
of the multi-information
Advertisement
Table of Contents
