Selecting RF to Operate your Devices
1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
The 'RF IR Tool' screen appears.
The Device Overview appears.
4 Tap the Device for which you want to select RF.
The 'Select IR or RF' screen appears. By default IR is selected in the Sending
The Define RF button is disabled.
5 Choose RF in the Sending Signals list.
The Define RF button is enabled.
The 'RF Settings' screen appears.
7 Select the RF Channel in the RF Channel list you use for the RF
The RF Channel on the SBC Li900 has to be the same as the RF Channel on
8 Select the Extender ID in the Extender ID list you use for the RF
The Extender ID on the SBC Li900 has to be the same as the Extender ID on
The RF settings are saved.
ProntoPro NG will send out RF signals for the selected device.
Using the Power Features
in the Tools Menu.
You can use several RF Extenders with your ProntoPro NG. For each RF
Extender you use for your devices, you need to set the RF Channel and the
The RF Channel is identical for all RF Extenders. The Extender ID on the SBC
Li900 is unique for each RF Extender.
in the 'RF Settings' screen.
in the 'Select IR or RF' screen.
Try to keep ProntoPro NG and the RF Extender away from metal objects, as this
will have a negative impact on the range.
in the upper left corner of the