Customising ProntoPro NG
Labelling a Button
1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
The 'Label Tool' screen appears.
The page you last visited appears.
4 Navigate to the Device and the Page that contains the button you want
5 Tap the button you want to label.
The 'Labelling' screen appears.
6 Tap the keyboard.
The keyboard zooms in.
7 Tap the character you want to add to the label.
The character is added to the label. The keyboard automatically zooms out
1 To zoom out without adding a character to the label, press
2 To use other characters and symbols, press
3 To remove characters, press the firm key labelled
8 You can add other characters to the label.
The label of the selected button is changed. The last visited page appears
The last visited page appears again, without changing the label of the selected
10 You can select other buttons on ProntoPro NG to label.
11 Press the left firm key labelled
the Label Tool.
in the Tools Menu.
The character is not added to the label. The keyboard is zoomed out.
The character set on the keyboard switches.
You can choose from four different character sets.
The character in front of the cursor is removed.
in the upper left corner of the
below the touch screen to exit