Customising ProntoPro NG
In the Tools:
Press the firm key labelled
the Tools Menu.
Defining the Brand for a Device
ProntoPro NG contains a huge list of brands and their corresponding IR codes in its
database. ProntoPro NG uses these IR codes to control devices. Because there are
several brands using specific IR codes, you have to define the brands and the
corresponding code sets for each device. You can either have ProntoPro NG
autosearch the brand or select it yourself. If a device's brand contains more than
one IR code set, you also have to select it.
On the Device Overview you find buttons for the most common video and audio
devices. ProntoPro NG is set by default to operate Philips and Marantz devices. For
all devices other than Philips or Marantz, you first have to define the brand before
you can operate them with ProntoPro NG.
Selecting the Brand and Code Set for your Device
1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds.
The Tools Menu appears.
The 'Brand Tool' screen appears.
The Device Overview appears.
4 In the Device Overview, tap the Device for which you want to define
A message screen appears.
The 'Brands' screen appears.
to start using the Tool.
to go back to the Tools Menu.
to confirm an action and save the changes you made.
to cancel an action without saving the changes.
in the Tools Menu.
in the 'Brand Tool' screen.
to end a series of actions and go back to
in the upper left corner of the