Using the Power Features
Creating and Editing Macros
A macro allows you to send a sequence of commands when tapping one single
button. You can for instance switch on your TV, turn on a movie channel and
prepare your VCR for recording by rewinding the videotape. The macro contains an
action list. The action list can be created and edited in the Macro Tool.
In the Macro Tool you first have to select the button that will contain the macro,
also called the target button. Then, one by one, you create an action list by
adding actions to this target button. You can do this by:
Selecting another button and adding its actions to the action list of your
Adding a delay to the action list.
Adding a beep to the action list.
After creating the macro, all actions you added to the action list are executed
when you tap the button.
Creating a Macro
1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
The 'Macro Tool' screen appears.
The last visited page appears.
4 Navigate to the Device and the Page that contains the target button
you want to use for a macro.
5 Tap the button you want to select as a target
If you can use the button to program a macro,
the 'Macro' screen appears.
If you cannot use the button to program a
macro, you hear a Failure beep.
Once you have programmed a macro, the button actions will not be changed when
you select another brand in the Brand Tool.
in the Tools Menu.
in the 'Macro Tool' screen.
in the upper left corner of the