Installation - Security Tronix ST-IP2FWD Quick Start Manual

2 Installation

Before you start:
Make sure the device in the package is in good condition and all the

assembly parts are included.
Make sure all the related equipment is power-off during

installation.
Check the specification of the products for the installation

environment.
Make sure the power supply is matched with your required voltage

to avoid damage.
If the product does not function properly, please contact your

dealer or technical support. Do not disassemble the camera for
repair or maintenance by yourself.
Make sure that the wall is strong enough to withstand three times

the weight of the camera.
For the cameras that supports IR, you are required to pay attention
to the following precautions to prevent IR reflection:
● Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the installation
is completed. If there is dust or grease on the dome cover,
clean the dome cover with clean soft cloth and isopropyl
alcohol.
ST-IP2FWD QUICK START GUIDE
11