Advertisement
Unpacking
Package Contents:
(1) ST-HD-D2812M-2MP Motorized Varifocal IR Camera
(1) Installation Manual
Note: The ST-HD-D2812M-2MP requires a 12VDC 1A power supply such
as the ST-PS12VDC1A.
Ensure that all accessories and documentation are removed from the
container before discarding packing material.
Inspect the front, sides, and rear of the equipment for shipping
damage. Make sure the equipment is clean, and no connectors are
broken, damaged, or loose. If equipment appears to be damaged or
defective please contact your distributor or SecurityTronix at:
(800) 688-9282, press 3 for tech support, then press 2 for CCTV.
Setup & Installation
!! ATTENTION !!
The installer must comply with electrical safety standards.
There must be sufficient space between the camera's power
supply and video line and any high voltage equipment and/or
cables.
To help ensure the camera's life and proper operation do not
point the camera towards the sun or strong light.
Do not install the camera in an environment where the
temperature is above 130°f.
Do not install the camera near a magnetic field or a high-
power motor.
Do not mount the camera near a radiator or heater.
The installation site and material must fully support the
weight of the product.
2
Advertisement
