Advertisement
1 Introduction
1.1 Product Features
This series of HD-TVI camera adopts high
performance sensors and advanced circuit board
design technology. It features high resolution, low
distortion, and low noise, etc. Designed for use in
surveillance systems.
The main features are as follows:
High performance CMOS sensor and high resolution
bring high-quality image;
Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;
IR cut filter with auto switch;
OSD menu, parameters are configurable;
Auto white balance and internal synchronization;
SMART IR mode;
True WDR;
Advanced 3-axis design meets different installation
requirements;
1.2 Overview
Mounting Base
P Position
Bracket
Bubble
2 Installation
Before you start:
Please make sure that the device in the package is in
good condition and all the assembly parts are
included.
Make sure that all the related equipment is powered
off during installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your required output to avoid damage.
Please make sure the wall is strong enough to
withstand three times the weight of the camera and
the mounting.
If the wall is cement, you need to insert expansion
screws before you install the camera. If the wall is
wooden, you can use self-tapping screw to secure the
camera.
If the product does not function properly, please
contact your dealer or technical support. Do not
disassemble the camera for repair or maintenance by
yourself.
Figure 1-1 Overview of Dome Camera
DC 12V Power Cord
IR LED
Lens
Black Liner
Video Cable
Safety Rope
Advertisement
