Setting The Network Camera Over The Lan - Security Tronix ST-IP2FWD Quick Start Manual

3 Setting the Network Camera over the
LAN
Purpose:
To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet as
your PC. Then, install the SADP or client software to search and
change the IP of network camera.
The following figure shows the cable connection of network
camera to PC:
Set the IP address of the camera for accessing via LAN.
Steps:
1. To get the IP address, you can choose either of the following
methods:
 Use SADP, a software tool which can automatically detect
network cameras in the LAN and list the device information like
IP address, subnet mask, port number, device serial number,
device version, etc., shown in Figure 3-2.
ST-IP2FWD QUICK START GUIDE
Figure 3-1 Wiring over LAN
26