Advertisement
2 Installation
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Please make sure the wall is strong enough to withstand more than 8 times the
weight of the dome and the mount.
For a cement wall, you need to use the expansion screws to fix the mount.
Do not drag the speed dome with its waterproof cables as shown in Figure 1-1,
Note:
otherwise the waterproof performance will be affected.
Steps:
1. Remove the protective sticker from the dome drive.
2. Drill 4 screw holes in the wall according to the holes of the mount.
3. Secure the wall mount to the wall with the M8 expansion screws.
ST-IP2IRPTZ QUICK START GUIDE
Figure 1-1 Do Not Drag the Cables
Protective
Sticker
Figure 2-1 Protective Sticker
7
Advertisement
